![adsea9d-wb](/media/com_hikashop/upload/thumbnails/200x240/adsea9d-wb.jpg ""C" seat rail only (7 bolt type) - new type")
![str3-wb](/media/com_hikashop/upload/thumbnails/200x240/str3-wb.jpg ""C" type track runner for 16mm diameter pipe, shark tooth")
![str50-wb](/media/com_hikashop/upload/thumbnails/200x240/str50-wb.jpg ""C": type clamp to attach steering stretcher to stretcher pipe")
![rig8d-wm](/media/com_hikashop/upload/thumbnails/200x240/rig8d-wm.jpg ""O" shaped spacers for pin")
![mbr-vor-hor-rub 1](/media/com_hikashop/upload/thumbnails/200x240/mbr-vor-hor-rub_1.jpg "1000mm erubber to fit "Mbr arm3a" and "UNMbr arm3a" when used without a sliding arm")
 diameter, 70kg (155lb), "free" wheel for Tro1 and Tro2.")
 base for single side")
 connector (need same qty as "Mbr base-d") + 2 of "bolt 1"")
 base for single side")
 base for double side")
 cross stay for base, 2 pieces needed, (actual length 1300mm) + "bolt 2"")
 cross stay for upright, 1 piece needed, (actual length 1350mm) + "bolt 2"")
 cross stay for vertical and horizontal oar racks + "bolt 1"")
 base for double side")
 cross stay for base, 2 pieces needed, (actual length 1900mm) + "bolt 2"")
 cross stay for upright, 1 piece needed, (actual length 1950mm) + "bolt 2"")
 cross stay for vertical and horizontal oar racks + "bolt 1"")
 tall upright + "bolt 1"")
 tall upright for single or double side + "bolt 1"")
2000mm (79") tall upright for single or double side + "bolt 1"
Material: Steel
 diameter, 250kg (550lb), "fixed" wheel (2 for each base) + "bolt 5"")
 diameter, 250kg (550lb), "fixed" wheel (2 for each base) + "bolt 5"")
 diameter, 250kg (550lb), "free" wheel (2 for each base) + "bolt 5"")
 diameter, 250kg (550lb), "free" wheel (2 for each base) + "bolt 5"")
 tall upright + "bolt 1"")
 tall upright for single or double side + "bolt 1"")
2500mm (98.5") tall upright for single or double side + "bolt 1"
Material: Steel
 cross stay for 1s/2s + "bolt 2"")
 shim to level floor, when not used with wheels, powder painted")
3 stay sweep rigger frame, with Euro style 12mm block - hard anodised
Material: Aluminium
 tall upright for single or double side + "bolt 1"")
3000mm (118") tall upright for single or double side + "bolt 1"
Material: Steel
 tall upright for single or double side + "bolt 1"")
3500mm (138") tall upright for single or double side + "bolt 1"
Material: Steel
4 of 8x120mm bolts, 8 of 8mm washers, 4 of 8mm nuts
4 of 8x120mm bolts, 8 of 8mm washers, 4 of 8mm nuts
4 of 8x20mm bolts, 8 of 8mm washers, 4 of 8mm locking nuts for Tro3&Tro4
Material: Stainless
4 of 8x75mm bolts, 8 of 8mm washers, 4 of 8mm nuts
4 of 8x75mm bolts, 8 of 8mm washers, 4 of 8mm nuts
 cross stay for 4s + "bolt 2"")
4x12mm C/S screw (for fin box Fin10A)
Material: SS304
Attach stretcher track for 1s, cable guide holder to shoe plate Str44A
4x16mm ggrub screw for CO Finbox
4x16mm grub screw for CO fin box Fin54a (use 2.5mm allen key)
4x30mm flange screw, posi + (for bow ball for Freedom 1s and 2s)
Material: SS304
 tall foot for bases without wheels (2 for each base) + "bolt 5"")
 cross stay for 4s + "bolt 2"")
6mm knob nut - nylon surround (for stretcher pipe for 1s)
Material: SS316
6mm nylon wing nut
6mm nlyon wing nut (attach shoe plate to stretcher)(attach stretcher pipe to stretcher tracks)(attach wing riggers and CO folding riggers to sax
6x45mm C/S screw (attach QR base to sax lip? attach the rigger holder to coastal boat)
6x45mm C/S screw (attach QR base to sax lip? attach the rigger holder to coastal boat)
 wide boat trolley with 4 "free" wheels, bolts and rubber top")
![mbr-vor-hor-rub 1 619129785](/media/com_hikashop/upload/thumbnails/200x240/mbr-vor-hor-rub_1_619129785.jpg "700mm rubber to fit "Mbr arm1a" and "UNMbr arm1a"")
![mbr-vor-hor-rub 1 2041779981](/media/com_hikashop/upload/thumbnails/200x240/mbr-vor-hor-rub_1_2041779981.jpg "800mm rubber to fit "Hor arm-s" and "UNHor arm-s" (1 for each arm) (same as Mbr-rub2)")
![mbr-vor-hor-rub 1 1909336757](/media/com_hikashop/upload/thumbnails/200x240/mbr-vor-hor-rub_1_1909336757.jpg "800mm rubber to fit "Mbr arm2a" and "UNMbr arm2a" when used without a sliding arm")
8mm spring washer - (for new rigger pins Rig2) (for section bolts)
Material: SS304/SS316
 arm with extruded rubber top + "bolt 1"")
 wide boat trolley with 4 "free" wheels, bolts and rubber top")
Attachment for Reverse Wing (incl. 2 of 6x20mm hex screw, plate washers, 1 of hex nut, spring washer, 8mm knob nut)
inclusief 2 of 6x20mm hex screw, plate washers, 1 of hex nut, spring washer, 8mm knob nut
Axle complete for double action seat
Material: Stainless
Include 2 of SeaD2, 2 of SeaD3
